Best MPPT Solar Charge Controller

Finding a suitable MPPT solar charge controller can be challenging.

These are the criteria we will use to rank each MPPT:

  • Current
  • Battery voltage
  • Compatible with Lithium (LiFePO4) batteries
  • Max input voltage
  • Price
  • Smart options (Bluetooth) and display
  • Company reputation and warranty

Let’s get started!

 Best Overall  Best value for money Mid-range MPPT
Victron Smart Solar
Epever
Renogy
Best overall MPPT controller with Bluetooth from a reputable company with long warranty. Best budget MPPT charge controller with display. Get this if you don’t need Bluetooth. Best mid-range MPPT charge controller with options to add Bluetooth but has a bad customer service.
12/24V 12/24V 12/24V
10A/15A/20A/30A/50A 20A/30A/40A 10A/20A/30A/40A
Max 100V DC input Max 100V DC input Max 100V DC input
Lithium Compatible Lithium Compatible Lithium Compatible
Expensive Most affordable MPPT Mid-range MPPT
Bluetooth/ No display Comes with display / no Bluetooth Order Bluetooth module seperate
5 years warranty 1-year warranty 1-year warranty, but many stories of bad customer service

Let’s look at each charge controller in detail

Victron SmartSolar 100/30

Victron is a Dutch company and well-known brand in DIY solar. It combines reliable electronics with good customer service and long warranties. Their engineering happens in the Netherlands and their products are made in India.

Keeping all these benefits in mind, we can expect to pay a premium price for this product. The customer reviews for this charge controller and the whole brand, in general, is the best in the industry. Just take a look at their reviews on amazon 4.8 stars from 6,452 ratings globally.

Victron customer reviews

The Victron charge controller selection ranges from 10A all the way to 200Amps. At the end of this article, I will talk more about the big charge controller. These are the most common charge controller being sold:

  • 10/75
  • 15/75
  • 15/100
  • 20/100
  • 30/100
  • 50/100
  • 100/450
  • 200/450

The first number is the charging current to the battery. If you have a 12V battery and a charging current of 20A, you can half the current by increasing your battery voltage to 24V. This is a good way to save money on your charge controller.

300W of solar panels / 12V battery voltage = 25A charging current -> 30A charge controller

The second number is the maximum input voltage from the solar panels. This is the Voc (volts open circuit) times 1.25 as a safety factor.

21.6Voc * 3 panels * 1.25 = 81V DC -> max 100VDC input

This charge controller is compatible with lithium which you can set and adjust in the Victron connect app.

The size of this charge controller is rather small compared to others on this list. Which makes it ideal for placing in small spots like an RV or boat.

The charge controller has no display but can be monitored with Bluetooth through the free victron connect app.

 

Epever 100/30

Epever is a Chinese company (Beijing Epsolar Technology) that started in 2007, so it’s not going to disappear anytime soon.

Its tracer AN and XTRA series charge controller are well-known products. They offer the best in terms of price and quality. If you are looking for a budget one that is compatible with lithium, this is the one.

The difference between the AN and XTRA series is that the XTRA series has a greater input voltage of 150VDC.

The charge controller is not as small as a Victron charge controller but it comes with a display that Victron doesn’t have.

To select the charging profile for a 12V battery, select F04, if you have a 24V battery, select F08 (manual).

You can read a review from a customer who had the 30A version for over two years:

Customer review for the EPever Tracer AN 30A

The warranty on this product is 1 year. Stories of warranty claims are overall positive.

I use this charge controller in my test setup. It’s easy to use and the settings can easily be changed which in my case is a LiFePO4 charge setting.

Epever solar charge controller in my test setup

You can add a remote display (wired) that shows the charge controller’s stats. Sometimes this is included in the purchase.

Display of the Epever tracer

 

Renogy 100/30A

Lastly, we have the Renogy MPPT charge controller.

We put this charge controller last because there are a lot of bad customer support stories out there. This is not only the case for the charge controller but the brand overall. So that’s why this charge controller would not be my first option.

However, if you get it to work then it’s a good charge controller for decent money. The reviews for this device are overall positive.

The basic unit only contains the charge controller, you need to buy and additional Bluetooth device so you can use it with your phone.

It comes with a display where you can set all the required parameters, so the Bluetooth device is not needed for setup.

They come at the following version:

  • 10A (36/48V)
  • 20A (12/24V)
  • 30A (12/24V)
  • 40A (12/24V)

It has the same size as the Epever, is compatible with lithium batteries, and a max input voltage of 100VDC.

 

Victron SmartSolar MPPT RS 450/100&200

This charge controller is meant for large systems. The input voltage is 450VDC and the current to the battery can be from 100A up to 200A. This charge controller is only suitable for 48V server rack batteries.

victron smartsolar MPPT RS 450 100/200A

Let’s calculate how many watts this device can support.

52V x 100A = 5,200W of solar

52V x 200A = 10,400W of solar

As you can see, this is for large solar systems. I didn’t know this product existed until a few months ago. That’s why I’m mentioning this at the end of the article if you are planning on building a large solar system.

 

Our #1 Recommendation

 

The Victron SmartSolar charge controller is our recommended MPPT charge controller.

If you have a small to medium solar system and want lots of functionality and a long warrantee, this is the charge controller you need.

FAQ

Can a charge controller overcharge a battery?

If the voltages are correct, then the battery will not get overcharged.

Most charge controllers have pre-defined voltage levels for different charging profiles. You must match these to your battery type, whether lead-acid or lithium.

Do I need a Dump load for my MPPT charge controller?

No, the excess solar power doesn’t need to go to a dump load when the battery is full. The charge controller acts like a switch.

Leave a Comment